Did you know that...

...Qnect’s software combines both connection engineering and detailing extraordinarily fast with the following deliverables?

• Preventing schedule drift- 60% to 80% of the joints in your project engineered and detailed in hours and revisions in seconds per joints

Learn more by visiting our Schedule Drift Webinar Review blog post.

Did you know that...

...Qnect’s software combines both connection engineering and detailing extraordinarily fast with the following deliverables?

• One station fabrication- we maximize the number of pieces that go to one station vs two stations within client’s parameters, either all welded or all bolted

Learn more by visiting our 3 Significant Steps to Improve Fabrication Production Webinar Review where you will find details.

Did you know that...

...Qnect’s software combines both connection engineering and detailing extraordinarily fast with the following deliverable?

• Reduce time to fabricate and erect - optimizing each joint with typical results of bolt reduction of 1 to 1 ½ bolts/ton; and 2 to 3 fewer holes to drill, cut or punch/ton.

Did you know that...

...Qnect’s software combines both connection engineering and detailing extraordinarily fast with the following deliverable?

• We do it for your detailer for the first two jobs to make the transition seamless

Did you know that...

...Qnect can and does provide for many clients 100% of the connection engineering? 

So we will carry the full CE contract and our CE partner will PE stamp Qnect’s part and finish the job standards Qnect did not do in the conventional manner and stamp those for a complete PE package delivery.

Did you know that...

...Qnect only charges $10/ton for all its deliverables?

This includes but is not limited to estimating, analytics, one station fabrication, optimization of joints, ALL REVISIONS.

Did you know that...

... Qnect does not charge for any revisions. 

It’s just part of the $10/ton price

Visit our Pricing Page

Did you know that...

...Qnect can work with any special fabricators system; part marking, standard parts, profile naming etc. 

View the demo by Tekla

Did you know that...

...Qnect designs for shear, shear and axial, IBC integrity requirements, the NYC integrity requirements, moment connections (field welded or top and bottom moment plates) and HSS field welded vertical bracing?

Did you know that...

..Qnect can provide connections for single angle bolted/bolted, welded/bolted and bolted/welded, double angles bolted/bolted, and welded/bolted, double angle knife connections, shear plates, extended shear plates with or without stabilizer plates at column web, extended shear plates at beam to beam connections, full pen moment connections, top and bottom moment connections, and standard roof slopes of up to ½ :12?

Wow! That's a lot!

See the full list here.

Did you know that...

...when two moment connected beams frame to both flanges of a WF column that the gravity part of the moment force for each moment can reduce or eliminate the doubler plate requirements?  They can, and Qnect allows for the placing of those gravity part moment forces in the UDA for this smart engineering purpose.

Did you know that...

...at top and bottom moment plates, that Qnect allows for the adding of a deck support plate, near side of beam flange, far side of beam flange or both sides of beam flange depending on the direction of the deck?

Did you know that...

...Qnect’s average job size is 300 tons?

View some projects that used Qnect

Did you know that...

...you can change the joint type right in the model?

Check out this 2 min video

Did you know that...

...that the deck support plate at top and bottom moment plates can be tack welded for shipment, bolt to ship for shipment, or we can extend the deck plate beyond the moment plate and held down by two additional bolts?

Did you know that...

...the shear plate or angle can be preset or changed within the model at any time, to place on one side of the beam or the other?  Or that the shear plates or single angle can be placed on one or any consistent side for the erector?

Did you know...

...that for your first two jobs, Qnect will actually take your live model (or use model sharing) and “Qnect” the joints and return the model without disruption to your work?

Tell us about your current project here

Did you know...

...that users are integrating Qnect into their estimating process, sometimes with Qnect preparing custom programming to accommodate unique circumstances?

Did you know that...

...Qnect will build a model and Qnect it during estimating to help you refine your bid and increase your chances to win the job?

Learn more about estimodeling pricing in the FAQ section in our Pricing Page.

Did you know that...

...Qnect has been used in 30 states in the USA?  And our preferred connection engineer partners will PE stamp all 50 states, which means we offer a 100% package.

Who are our partners? Learn about Qnect Partners here. 

Did you know that...

...with Qnect your return on investment could be linked to the following benefits: Bolt savings, Bolt overage savings, etc, etc?

Learn more 

• ROI for the Fabricator
• ROI for the Engineer (CE & EOR)
• ROI for the Detailer
• ROI for the Erector

Did you know...

 ..that our customers find success with Qnect on all size jobs from 30 tons to 30,000 tons?

View the Customer Success Stories here

Do you need more? Let us know!