CISC: Implement AISC-15 bolt holes preference
Allow some rotation of main beam about is span in combination with secondary slope.
-
- LIMIT 2.5 DEGREE SLOPE OF SECONDARY +
- 2.5 DEGREE ALLOWED ROTATION ON MAIN BEAM +
- MAINTAIN 2.5 DEGREE MAX DIFFERENCE RELATIVE BETWEEN GIRDER AND SECONDARY
- In other words we are adding a case that has these geometric limits
- secondary not skewed AND
- secondary sloped 2.5 deg max AND
- secondary not rotated AND
- main not sloped AND
- main rotated 5 deg. max AND
- limit to 2.5 deg total slope angle between main and secondary
- Where for main or secondary beam,
- Slope is an angle formed along the beam span and is measured relative to the global x-y plane (horizontal)
- Rotation is an angle is about the section of the beam beamsure relative to the global z axis (vertical)
Allow slopes up to 5% (2.86 deg.)
Connecting gravity column splice when not supposed to. This has been resolved
CS: User Chart Update
Widen pulldown to size of cell, and maybe show more than (2) choices vertically so it is easier to pick the profile preferences
Add column at the end that automatically shows value of dl-du and another for Case name, ie. I-A, 1-B or 1-C
Highlight in light yellow the columns that can be filled out by the user
Add bending check of shear plate with axial to stabilizers
- At beam to column web connections with axial load (incl integrity loads), or VB middle beam connections to column web with axial load, WITH stabilizer plates flush with beam flanges, add check of Shear Plate Bending.
- At beam to column web connections with axial load (incl integrity loads), or VB middle beam connections to column web with axial load, WITHOUT stabilizer plates flush with beam flanges, add check of Shear Plate Bending. Use calcs shown below modified from conventional case.
Add 1/32 in. gap at full depth fittings preference
Add Lifting Hole to column splice detail
Changes to "QuickQnect Dashboard" webpage
web-environment: Add Moment Connection Diagrams to the All Diagrams Sheet page and other
Show a Noconnect - unidentified parts report on button 2 request
Update alias names page and output