- The Overall Moment Plate length on two sides of the column + column depth width not to exceed 9ft
- Update all diagrams report for moments
- Add more specific Column Splice Noconnect Reasons
- 1. IF any one of the column splice profiles is not a W8, W10, W12, or W14 THEN show this noconnect reason
"This upper and lower column splice combination is not currently supported."
3. IF dl-du > 2.25 in. then show this noconnect reason
"The upper and lower column splice combination with dl - du > 2.25 in. is not currently supported.”
- Connection cost data for Filler Plates on connection cost (B+Op) reports
- Usability - Reorganize Preference Optional sections
- Standard Part Details functioning
- Allow >3" moment plate bolt spacing so bolts > 1 1/8 can be used
- Desktop: Add Qnect1EstimatDet and Qnect2EstimatDet fields to Tekla Filter input
- web-environment: Allow users to create a PDF from All Diagrams page
- Add 1/4 in. Setback preference choice to the "At Other Double Angles" drop down list
- Processing connections for estimating, detailing only and full engineering + detailing
- Adaptation to Tekla 2024